T46W031A
WARNING
Do not weld or apply heat to
the tire rim or disc. The tire
can explode due to the rapidly
increased pressure in the tire.
-
sure, damage, deformation,
and excessive wear on lug
and damage of rim and disc.
Also check if wheel bolts, rim
bolts, and nuts are loose.
•
•
TD2O457A
TREAD
When working on a eld where c are linearly aligned, the tread should be ad-
justed so that the tires do not cross over the c. Also, it is necessary to increase
the tread to prevent any accident when working on a slope or trailing.
(1) Bolt (2) Rim bolt (3) Rim (4) Disc
WARNING
Never operate tractor with a loose rim, wheel, or axle.
Make sure to perform inspection daily.
•
•
To Next Page
Loading...
