Kioti DK6010 - SLOW-BLOW FUSE (Ap)

57
7
-
43
MAINTENANCE
WARNING
Never use a fuse with the ca-
pacity higher than specified
on the fuse box cover.
If using a faulty fuse, steel
wire, or foil, the electrical de-
vice can be damaged or even
can catch a re.
•
•
NOTE
If the replaced fuse is blown
soon, it is probable that the wiring
system is faulty. In this case, con-
tact your local KIOTI Dealer.
If the fusible link, relay or other
electric component is defective,
contact your local KIOTI Dealer.
•
•
SLOW-BLOW FUSE (AP)
(1) Slow-blow Fuse
(A) Charging Power Fuse
(B) Preheating Power Fuse
td2O737A
Slow-blow fuse
60A
The slow-blow fuse is to protect
electric devices and wirings. If the ig-
nition, preheat, charge or main func-
tion is faulty, nd and move its cause
and replace the fuse with a new one.
IMPORTANT
Using a non-approved slow-
blow fuse can damage electrical
systems in the tractor severely.
Refer to the chapter “Trouble-
shooting” in this manual or
contact your local KIOTI Dealer
for specic information dealing
with electrical problems.
•
•
TD210-EEC인증용-DK6010H,DK6010C,DK643 43 2018-12-27 오전 10:30:56