EasyManua.ls Logo

Kioti DK6010 - ENGINE TROUBLESHOOTING

Kioti DK6010
242 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9
-
2
DK6010
Cause Countermeasures
1. When engine is difcult to start • Fuel is thick and doesn’t ow. • Check the fuel tank and fuel lter.
• Remove water, dirt and other impurities.
As all fuel will be ltered by the lter, if there should be water
or other foreign matters on the lter, replace the lter.
Air or water mixed in fuel sys-
tem.
If air is in the fuel lter or injection lines, the fuel pump will
not work properly.
To obtain proper fuel injection pressure, unscrew the fuel
cap nut and inspect the system.
Loosen air vent screw over fuel lter and fuel injection pump
to eliminate all the air in the fuel system.
Thick carbon deposits on orice
of injection nozzle.
This is caused when water or dirt is mixed in the fuel. Clean
the injection nozzle and check the fuel ller hole for damage.
Check to see if nozzle is working properly or not, if not,
install a new nozzle.
• Valve clearance is wrong Contact your KIOTI dealer.
Engine oil become thick in
cold weather and engine
cranks slow.
Change grade of oil according to the weather (Temperature).
This troubleshooting chart summarizes simple service items for users who are familiar with mechanical systems.
For more detailed service items, contact your local KIOTI Dealer.
ENGINE TROUBLESHOOTING
TD210-EEC인증용-DK6010H,DK6010C,DK62 2 2018-04-20 오후 1:30:39

Table of Contents

Other manuals for Kioti DK6010

Related product manuals