KEY SWITCH
(1) Key SwitcH
(A) OFF (B) ACC
(C) ON (D) START
START (D)
The position "D" indicates "Start".
In order to start the engine, turn the
PTO switch off. As soon as the en
-
gine is started, release the key then
the key will return to the position "C".
OFF (A)
When the key switch is in the posi-
tion "B," the engine and all electrical
devices in the vehicle are turned off.
However, asher lights and turn sig-
nal lights can be operated along with
their indication lamps on the dash
board.
ACC (B)
When the key switch is turned to
the position "B", brake lights, asher
lights and turn signal lights can be
operated.
ON (C)
The position "C" indicates the "ON "
position. As soon as the key switch
is turned to this position, the oil
pressure warning lamp and bat-
tery charge warning lamp come on.
(These turn off after the engine is
started)
The automatic preheating opera-
tion is informed by illumination of the
preheat indicator on the instrument
cluster. In cold weather, preheat the
engine sufficiently until the preheat
indicator goes off.
To Next Page
Loading...
