Switch
Position
Turning Lamp
2WD
Normal turning
Lamp OFF
4WD
Normal turning
4WD
Lamp ON
QT
(Quick
Turn)
When the angle of
the front wheel is
over 35 degrees
during turning, the
wheel on the turn-
ing side is rotated
at a double speed
for a sharp turn.
QT
Lamp ON
(1) Driving Mode Selection Switch
(A) 4WD (B) QT
TD2O410A
FWD/QUICK-TURN SWITCH
Use this switch to activate the 4WD
and QT (Quick Turn) modes. Press-
ing the upper section of the switch
activates the 4WD function while
pressing the lower section of it acti-
vates the QT function. Each mode is
performed as follows:
CAUTION
If the hazard lamps are turned on
for an extended period of time
while the engine is stopped, the
battery can be discharged. There-
fore, use them only in emergency.
The hazard lamp can be oper-
ated without the key inserted.
•
•
CAUTION
Do not activate the 4WD func-
tion on a paved road or while
driving at a high speed. It may
cause an unexpected accident.
Before driving at a high speed,
in the 2WD position. If driving
at a high speed with the 4WD
function activated, the tires
can be rapidly worn.
•
•
To Next Page
Loading...
