td2O634A
DRAWBAR AND TRAILER
(1) Draw Bar
DISMOUNTING THE IMPLEMENT
1. Park the tractor with the implement
on the level ground and lower the
implement all the way down. Install
the implement support as needed.
2. Disconnect the top link and lower
links from the implement by re-
moving the pins.
3.
Be sure to insert the set pins, lynch
pins and snap pins back to the im-
plement securely to keep those safe.
4. Stop the engine and move the re-
mote hydraulic control lever back
and forth to release the hydraulic
pressure in the system before dis-
connecting hydraulic couplers.
5. Put the top link back to its hook.
Hold both lower links together with
a rubber band. Otherwise, the low-
er links can contact with rear tires
and cause damage to the lower
links and tires while driving.
td2O635A
TYPE 1 (Standard for EU market) TYPE 3
(1) Adjustable height Hitch (Optional)
td2O634A
TYPE 4 (Standard for the other market)
td2O636A
TYPE 2
To Next Page
Loading...
