(1) RES/SET Button
PTO CRUISE SETTING SWITCH
PTO CRUISE ACTIVATION
Run the engine at a speed over 1,300
RPM. With the brake pedal released,
set the PTO cruise switch to the ON
position and press the SET (1) por-
tion of the cruise activation switch
The cruise setting switch can be
operated as follows while the PTO
cruise function is activated.
D21O437A
• RES(+) : Speed is increased by 50
RPM when pressing it.
• SET(-) : Speed is decreased by 50
RPM when pressing it.
PTO CRUISE DEACTIVATION
Depress the brake pedal or set the
PTO cruise switch to the "OFF" po
-
sition to deactivate the PTO cruise
function.
If the PTO cruise function is deacti-
vated by depressing the brake pedal
with the PTO cruise switch set in the
"ON" position, pressing the RES(+)
switch once resumes the previous
PTO activation setting.
If the brake pedals are not
connected to each other, de-
pressing the brake pedal does
not deactivate the PTO cruise
function.
•
IMPORTANT
To Next Page
Loading...
Need help?
General
