(1) PTO Switch
TD2O413B
PTO SWITCH (ON / OFF)
The PTO switch is used to supply
power from the tractor to the imple-
ment.
Make sure to put this switch into the
“OFF” position before starting the en-
gine. Otherwise, the engine cannot
be started.
The rear PTO rotates at 540 rpm
when the engine speed is approx.
2.444 rpm.
To activate the PTO, press and turn
the switch clockwise. To deactivate it,
press the switch once.
CAUTION
the followings:
Make sure to use only speci
-
Keep the engine oil replace-
ment schedule.
Check the engine oil level fre
-
quently to keep it to the speci-
Avoid any unnecessary engine
idling.
Never stop the engine during
driving.
Never place the shift lever in
the neutral position when driv-
ing downhill.
Do not use any engine oil ad
-
ditive or fuel additive.
Avoid driving with any warn
-
ing lamp illuminated.
Do not allow any flammable
materials, such as dry grass
and paper, to come near the
•
•
•
•
•
•
•
•
•
CAUTION
To avoid personal injury and
accident:
B e f o r e d i s a s s e m b l i n g o r
clean ing t he PTO sys tem,
make sure that the PTO switch
is in the “OFF” position, the
engine is st opped, an d all
parts are stopped.
Always keep the PTO driving
part clean. Also, check the
PTO cover is closed while PTO
is in operation.
Disengage the PTO while driv
-
ing the tractor on the public
road.
Be careful no t to g et your
hand, foot, cloth, or hair into
any driving part while the PTO
is in operation. You can be se-
verely injured.
Make sure that no one is around
the tractor and implement while
the PTO is in operation.
•
•
•
•
To Next Page
Loading...
