Kioti DK6010 - Page 163

56
6
-
7
3-POINT HITCH IMPLEMENT AND LOADER OPERATION
The draw bar is used to pull an im-
plement, such as a trailer.
Make sure to check the max. towing
weight of the trailer and max. vertical
load that can be applied to the draw
bar.
The specication and type of the draw-
bar are different according to the each
countries.
TYPE 1
AREA EU
Type Tractor drawbar
Approval number e11*89/173*2000/1*2002*0
Maker Daedong Industial Co.,Ltd
Towable mass 4.300 kg
Unbraked tow-
able mass
3.000 kg
Independently
braked towable
mass
3.300 kg
Vertical load
on the coupling
point
735 daN
TYPE 3 (#3453)
AREA FOR FRANCE
THE OTHER
COUNTRY
Type
Clevis type (non automatic
coupling device)
Approval number e4 D 087
Maker Scharmuller GmbH
Towable mass
3.500 kg 3.700 kg
Vertical load on the
coupling point
250 daN 250 daN
※
The tractors sold in france are be
-
long to vehicle of the variant ???F?
and the towable mass of those
tractors is 3.500kg .
TYPE 2 (T5718-5503)
AREA EU
Type
Clevis type (non automatic
coupling device)
Approval number e11*2009/144*2013/8*4117*00
Maker Daedong Industial Co.,Ltd
Towable mass
4.300 kg
Vertical load on
the coupling point
735 daN
TYPE 4
AREA THE OTHER COUNTRY
Type
Tractor drawbar
Approval number e11*89/173*2000/1*2002*00
Maker Daedong Industial Co.,Ltd
Towable mass 4.300 kg
Unbraked tow-
able mass
3.000 kg
Independently
braked towable
mass
3.300 kg
Vertical load
on the cou-
pling point
735 daN
TD210-EEC인증용-DK6010H,DK6010C,DK67 7 2018-04-20 오후 1:28:13