3. Make sure that both brake pedals
are interlocked.
WARNING
If depressing only one brake
pedal at a high speed, the
tractor can lose its balance
and be overturned.
•
NOTE
If the implement won't be lifted,
press the one-touch switch (Lift-
ing/lowering). Otherwise, lower
the position control lever com-
pletely and lift it again.
•
(1) Position Control Lever
(A) “UP”
4. If an implement is attached, push
the position control lever back-
wards to lift the implement.
5. Increase slowly the engine RPM
from idle speed to medium speed.
(1) Hand Throttle Lever
: Slow : Fast
To Next Page
Loading...
