Before you use this brake valve,
please check if the brake brand and
types of the trailer are suitable with
as below.
Trailer Brake Valve
Brand
SAFIM
Model
202797MN / 22 -
see Appendix 13
Fluid type
Mineral hydraulic oil
(identical to the oil of
the tractor)
Dimensions
Piston Ø22 mm
Nominale pressure
220 bar
Maximal trailer-
brake pressure
140 +/-10 bar
Installation area
Rear of tractor
Trailer Brake Coupling
Brand
SAFIM
Model
Included in trailer
brake valve
Norm
ISO 5676-1983
Fluid type
Mineral hydraulic oil
(identical to the oil of
the tractor)
Nominale pressure
220 bar
Installation area
Included in trailer
brake valve
CAUTION
When removing the plug from
the coupler to connect the
brake hose, make sure that
no foreign material enters the
coupler.
•
WARNING
Never exceed a speed of 25km/
h (15 mph) when travelling with
hydraulically braked trailers.
If the number of brake opera-
tion increases during long dis-
tance driving, the oil tempera-
ture rises and the area around
the coupler can be hot. Be
careful not to get burned.
•
•
To Next Page
Loading...
