9. Check for correct coupling be-
tween tow hook and trailer. See
the Towing Attachments chapter.
10. Use ballast weight as recom-
mended. Never add more ballast
to compensate a higher load than
allowed. Reduce load for safety.
H11O682a
11. A safety chain will help control
drawn equipment should it be
accidentally separated from the
draw-bar while transporting. Using
the proper adaptor parts, attach
the chain to the tractor draw-bar
support or other specied anchor
locations. Provide only enough
slack in the chain to permit turn-
ing. See your Dealer for a chain
with a strength rating equal to, or
greater than the gross weight of
the towed equipment.
12. If the front of the tractor tends
to rise up when heavy imple-
ments are attached to the three
point hitch, weights should be
installed on the front of tractor.
Do not operate the tractor with a
light front end.
T66O112a
To Next Page
Loading...
