TD2O423E
2. Stage 2 warning lamp for DPF
clogging
: DPF Soot Loading Level 160% -
200%
Manual regeneration required
Engine RPM limit (below 2.200
rpm)
If the DPF is not regenerated in the
stage 1 warning state, the warning
lamp blinks. In this state, make sure
to perform DPF regeneration pro-
cess. (see page 4-14)
1. Stage 1 warning lamp for DPF
clogging
: DPF Soot Loading Level 120% -
160%
Manual regeneration required
Engine RPM limit (below 2.200
rpm)
If this warning lamp comes on, make
sure to press the "regeneration" but-
ton. (see page 4-14)
Do not touch or come near the
DPF part during the regenera-
tion process as its surround-
ing area is hot. If not, you can
get burnt.
•
WARNING
To Next Page
Loading...
