4. Once you have selected the type of data required, press
F2 (Save) to confirm the selection. You are prompted to
select a target device.
5. Select the target device, using the F1 button. You can
select a device in this order: HD ➛ FD ➛ CRD ➛ HD…
6. After selecting a target device, the content of the selected
device appears.
At this point, you can:
• Create a new “.SET” folder (see “Creating a new “.SET”
folder” on page 17-12).
• Save onto an existing “.SET” folder.
7. If you are saving into an existing folder, move the
desired “.SET” folder to the first line of the display, using
the E-H (Scroll) buttons (or the TEMPO/VALUE con-
trols).
8. Once the target folder is selected, press F2 (Save) to save
the files. The “Are you sure?” message will appear. Press
ENTER to confirm, or EXIT to abort.
Warning: After confirming, all data in the target folder is
deleted.
When the operation is completed (the “Wait” indicator
disappears), the source page comes back in the display,
and you may perform further saving operations.
Saving a single bank
You can save a single User bank with a single operation. A
bank corresponds to a button on the control panel of the
instrument (i.e. a button of the STYLE section).
1. If saving on a floppy disk, insert the disk into the disk
drive.
2. The whole content (“All”) of the internal memory is
already selected. Press F3 (Open) to open the “All”
folder. A list of User data types appear (each type is a
separate folder).
3. Use the E-H (Scroll) buttons (or the TEMPO/VALUE
controls) to move the data type you are looking for to
the first line of the display.
4. Once the data type is selected, press F3 (Open) to open
the folder and gain access to the separate banks.
5. Use the E-H (Scroll) buttons (or the TEMPO/VALUE
controls) to move the bank to save to the first line of the
display.
6. Once you have selected the bank that you want to save,
press F2 (Save) to confirm the selection. You are
prompted to select a target device.
7. Select the target device, using the F1 button. You can
select a device in this order: HD ➛ FD ➛ CRD ➛ HD…
8. After selecting a target device, the content of the selected
device appears.
Device Type
HD Hard disk
FD Floppy disk
CRD Flash Card
Use F1 to select
a target device.
-- SAVE OPEN CLOSE
Disk:Save
NEW_NAME.SET
LIVE.SET
ETHNICA.SET |
FD SAVE OPEN CLOSE
Disk:Save
Device Type
HD Hard disk
FD Floppy disk
CRD Flash Card
GLOBAL |
PERFORM
PROGRAM |
FD SAVE OPEN CLOSE
Disk:Save
USER01.STY |
USER02.STY
USER03.STY |
FD SAVE OPEN CLOSE
Disk:Save
Use F1 to select
a target device.
-- SAVE OPEN CLOSE
Disk:Save
NEW_NAME.SET
LIVE.SET
ETHNICA.SET |
FD SAVE OPEN CLOSE
Disk:Save
To Next Page
Loading...
Need help?
General
