048: AutoPan Dly
(Stereo Auto Panning Delay)
This stereo delay effect pans the delay sound left and right
using the LFO.
Left
Right
Wet / Dry
Wet / Dry
Stereo In - Stereo Out
LFO Phase
LFO Shape
Pan
Pan
LFO: Tri / Sin
Depth
Delay
Delay
High Damp Low Damp
High Damp
Low Damp
Feedback
a
L Delay Time [msec]
Sets the delay time for the left channel
0.0...680.0msec
L Feedback
Sets the feedback amount for the left channel
–100...+100
b
R Delay Time [msec]
Sets the delay time for the right channel
0.0...680.0msec
R Feedback
Sets the feedback amount for the right channel
–100...+100
c
High Damp [%]
Sets the damping amount in the high range
0...100%
☞ Fx:043
Low Damp [%]
Sets the damping amount in the low range
0...100%
☞ Fx:043
d
LFO Waveform
Selects LFO Waveform
Triangle, Sine
LFO Shape –100...+100
Determines how much the LFO waveform is changed
☞ Fx:020
e
LFO Phase [degree] –180...+180
Sets the LFO phase difference between the left and right
☞ Fx:034
f
Panning Frequency [Hz]
Sets the panning speed
0.02...20.00Hz
g
Panning Depth
Sets the panning width
0...100
Src Off...Tempo
Selects the modulation source for the panning width
Amt
Set the modulation amount of the panning width
–100...+100
h
Wet/Dry Dry, 1:99...99:1, Wet
Table , “Sets the balance between the effect and dry sounds,” on page 1
Src Off...Tempo
Table , “Selects the modulation source of the effect balance,” on page 1
Amt
Table , “Sets the modulation amount of the effect bal-
ance,” on page 1
–100...+100
To Next Page
Loading...
