System Menu > Optional Network
223
Item Description
[Netwk Name(SSID)] Set the SSID (Service Set Identifier) of the wireless LAN to which the
machine connects.
NOTE
Up to 32 characters can be entered.
[Connection Mode] Set Connection Mode.
Value: [Ad Hoc], [Infrastructure]
NOTE
[Ad Hoc]
Communicates directly with the device without going through the
access point. It cannot be connected to more than one device.
[Infrastructure]
Communicates via the access point.
[Channel]
Performs channel configuration. Use [ ][ ] or the numeric keys to
set the value.
Value: 1 to 11
[Netwk Authentic.] Select network authentication type. If you want to select another
authentication method, access the web page from your computer and
set it.
Value: [Open], [Shared], [WPA-PSK]
*1
, [WPA2-PSK]
*1
*1 Not displayed when [Ad Hoc] is specified in [Connection Mode].
[Encryption] Select encryption method. If you selected a setting other than [Disable],
enter the WEP key or preshared key. The setting values vary depending
on the Network Authentication setting. Select [Data Encryption].
• If the network authentication type is [Open] or [Shared]
Value: [Disable], [WEP]
• If the network authentication type is [WPA-PSK] or [WPA2-PSK]
Value: [TKIP]
*2
, [AES], [Auto]
*2
, [Preshared Key]
*2 Not displayed when [WPA2-PSK] is specified in [Netwk Authentic.].
NOTE
• If you selected [WEP], enter the WEP key. Up to 26 characters can be
entered.
• If you selected [TKIP], [AES], or [Auto], enter the pre-shared key. 8 to
64 characters can be entered.