Installing and Setting up the Machine > Default Settings of the Machine
56
IMPORTANT
You can connect up to ten mobile devices at the same time using Wi-Fi Direct setting. When the devices that
support Wi-Fi Direct are connected, if you want to connect other device, disconnect the already connected
devices from the network. The disconnection methods are as follows:
• Disconnect the network from the computer or handheld computer
• Disconnecting all devices from the network on the operation panel
Select [Status] > [ ][ ] key > [Wi-Fi Direct] > [OK] key > [ConnectionStatus] > [OK] key > [Menu] >
[Disconnect All] > [OK] key in this order.
• Configuring auto disconnecting time from the System menu
➡ Wi-Fi Direct Set (page 201)
• Configuring auto disconnecting time from the Command Center RX
➡ Command Center RX User Guide
To Next Page
Loading...
