2J0/2J1/2J2
2-1-5
2-1-3 Expose section
(1) Laser scanner unit
The charged surface of the drum is then scanned by the laser beam from the laser scanner unit. The laser beam is dis-
persed as the polygon motor revolves to reflect the laser beam over the drum. Various lenses and mirror are housed in the
laser scanner unit, adjust the diameter of the laser beam, and focalize it at the drum surface.
Figure 2-1-9Laser scanner unit
35/37 ppm printer
(EUR/USA model)
40/42 and 45/47 ppm printers
(EUR/USA model)
(1) Polygon motor (polygon mirror)
(2) f-θ sub lens
(3) f-θ main lens
(4) Direction change mirror
(5) Protective glass
To Next Page
Loading...
