Kyocera FS-2020D - Printing a Status Page for Network

2J0/2J1/2J2-2
1-3-6
Printing a status page for network
Description
On the status page for network, detailed network setting information is printed.
Procedure
1. Enter the maintenance mode [>>Print Network Status Page].
2. Press the OK key. [>>Print Network Status Page?] will be displayed.
3. Press the OK key. Three sheets of network status page will be printed.
Completion
Maintenance items Description
No. Items Description
 SPD information -
 RFID information -
 RFID reader/writer version infor-
mation
-
 Toner install information 0: Off
t: On
 Engine parameter information Hexadecimal, 512 bytes
 Drum status -
 Drum surface potential -
 Drum sensitivity -
 Quantity of light (LSU) -
 DRT parameter coefficient -
 Optional paper feeder software
version
Paper feeder 1/Paper feeder 2/Paper feeder 3/Bulk paper feeder
 Optional font version -
 Optional table version -
 Optional message version -
 Optional WEB version -
 Network interface card version -
 Drum ID -
 Drum serial number -
NOTE:
Code conversion
ABCDEFGH I J
0123456789
>>Print Network
Status Page