Kyocera FS-2020D - Detaching and Refitting the Registration Upper and Lower Roller

2J0/2J1/2J2
1-5-8
(3) Detaching and refitting the registration upper and lower roller
Procedure
1. Remove the developing unit (See page 1-5-
11).
2. Remove the spring.
3. Pull the registration upper roller.
Figure 1-5-9
4. Remove the registration upper roller from
the bush.
5. Remove the gear and bush from the regis-
tration upper roller.
Figure 1-5-10
Spring
Registration
upper roller
Registration
upper roller
Gear
Bush
Bush
Registration
upper roller