Kyocera FS-2020D - Detaching and Refitting the Paper Feed Drive Unit; Others

2J0/2J1/2J2
1-5-35
1-5-9 Others
(1) Detaching and refitting the paper feed drive unit
Procedure
1. Remove the paper cassette.
2. Remove the developing unit (See page 1-5-
11).
3. Remove the top cover (See page 1-5-3).
4. Remove the right cover (See page 1-5-4).
5. Remove five connectors from the connect-R
PWB.
6. Remove wires from the clamp.
7. While opening four hooks and then remove
the wires.
8. Remove the right fan motor.
Figure 1-5-47
YC13
YC12
YC4
YC9
YC8
YC2
YC1
YC6
YC5
YC7
YC3
YC10
YC11
Right fan motor
Connect-R PWB
Connect-R PWB
Connectors
Clamp
Hook
Hook
Hook
Hook