Kyocera FS-2020D - Page 29

2J0/2J1/2J2-2
1-3-5
Maintenance items Description
No. Items Description
 Life counter
(The first line)
Machine/MP tray/Printer cassette/Paper feeder 1/Paper feeder 2/
Paper feeder 3/Duplex printing
Life counter
(The second line)
Bulk paper feeder/Envelope feeder/Drum unit/Maintenance kit
 Operation panel lock status 00: Off
01: Partial lock
02: Full lock
 USB information 00: Not connected
01: Full-Speed
02: Hi-Speed
 Paper handling information 0: Paper source unit select
1: Paper source unit
 Black and white printing
double count mode
0: All single counts
3: Folio, Single count, Less the 330 mm (length)
 Billing counting timing -
 Temperature (machine
inside)
-
 Relative temperature
(machine outside)
-
 Absolute temperature
(machine outside)
-
 XLI calibration information -
 Laser beam-A BD synchro-
nization exact adjustment
value
-
 Laser beam-B BD synchro-
nization exact adjustment
value
-
 Fixed asset number -
 Setting at JOB end judg-
ment time-out time in local
IF
-
 Media type attributes
1 to 28 (Not used: 18, 19,
20)
Weight settings
0: Light
1: Normal 1
2: Normal 2
3: Normal 3
4: Heavy 1
5: Heavy 2
6: Heavy 3
7: Extra Heavy
Fuser settings
0: High
1: Middle
2: Low
3: Vellum
Duplex settings
0: Disable
1: Enable