Kyocera TASKalfa 406ci

6-15
Using Various Functions > Functions
Paper Selection
Select the cassette or multi-purpose tray that contains the required paper size.
Select from [1] (Cassette 1) to [4] (Cassette 4) to use the paper contained in that cassette.
If [
Auto ] is selected, the paper matching the size of the original is selected automatically.
To s el ec t [
MP tray ], select [ Paper Size ] and [ Media Type ], and specify the paper size and the media type. The available
paper sizes and media types are shown in the table below.
NOTE
• Specify in advance the size and type of the paper loaded in the cassette.
Cassette/MP Tray Settings (page 8-7)
• Cassettes 2 to 4 are displayed when the optional paper feeder is installed.
Item Value Description
Paper Size Standard
Sizes 1
Metric models: A4
*1*2
, A5
*1*2
, A6
*1*2
, B5
*1*2
, B6
*1*2
, Folio
*1*2
,
216 x 340mm
Inch models: Letter
*1*2
, Legal
*1*2
, Statement
*1*2
, Executive,
Oficio II
*1 Paper size is automatically detected in the cassette.
*2 Paper size is automatically detected in the Multi Purpose Tray.
Select from the standard size.
Standard
Sizes 2
Metric models: Letter
*1*2
, Legal
*1*2
, Statement
*1*2
, Executive,
Oficio II, 16K
Inch models: A4
*1*2
, A5
*1*2
, A6
*1*2
, B5
*1*2
, B6
*1*2
, Folio
*1*2
,
216 x 340mm, 16K
Select from standard sizes
except Standard Sizes 1.
Others ISO B5, Envelope #10, Envelope #9, Envelope #6,
Envelope Monarch, Envelope DL, Envelope C5,
Hagaki (Cardstock)
*2
, Oufuku Hagaki (Return postcard), Youkei 4,
Youkei 2, Custom
*3
*3 For instructions on how to specify the custom paper size, refer to the following:
Custom Paper Size (page 8-11)
Select from special standard
sizes and custom sizes.
Size Entry Metric
X: 148 to 356 mm (in 1 mm increments)
Y: 70 to 216 mm (in 1 mm increments)
Enter the size not included in the
standard size.
*4
When you have selected [ Size
Entry ], use [ + ]/[ - ] or the numeric
keys to set the sizes of "X"
(horizontal) and "Y" (vertical).
Select [
# Keys ] to use the
numeric keys for entry.
*4 The input units can be changed in System Menu. For details, refer to the following:
Measurement (page 8-13)
Inch
X: 5.83 to 14.02" (in 0.01" increments)
Y: 2.76 to 8.50" (in 0.01" increments)
Media type Plain (60 to 105 g/m
2
), Transparency, Rough, Vellum (60 to 105 g/m
2
), Labels, Recycled, Preprinted
*5
,
Bond, Cardstock, Color, Prepunched
*5
, Letterhead
*5
, Envelope, Thick (106 to 220 g/m
2
), Coated,
High Quality, Custom 1-8
*5
*5 For instructions on how to specify the custom paper types 1 to 8, refer to the following:
Media Type Setting (page 8-13)
To print on preprinted or prepunched paper or on letterhead, refer to the following:
Special Paper Action (page 8-12)
IMPORTANT
When paper size and the media type for MP tray is specified, [Paper Settings] is selected. Note that if [MP
Tray] is pressed at this point, the settings will be canceled.
Copy
Org./Paper/
Finishing
Custom
Box
Functions
USB
Memory
Functions