Kyocera TASKalfa 406ci

5-62
Operation on the Machine > Job Box
Form for Form Overlay
Image Overlay feature copies the original document overlaid with a form or image. This Job Box is used to store the
forms or images for overlaying.
Storing a Form
You can store forms to be used for the form overlay in the job box. One page can be registered in one form.
1
Place the original.
2
Display the screen.
1 [ Home ] key > [ Job Box ]
2 [ Form for Form Overlay ] > [ Open ]
3
Store the forms.
1 Select [ Store File ].
2 If necessary, select the image quality of original, scanning density, etc. before the original is
scanned.
3 Press the [ Start ] key.
The original is scanned and stored in the [ Form for Form Overlay ] box.
Deleting a Form Stored
You can delete the form stored in the job box
1
Display the screen.
1 [ Home ] key > [ Job Box ]
2 [ Form for Form Overlay ] > [ Open ]
2
Delete the forms.
Select the form to delete > [ Delete ] > [ Yes ]
The form is deleted.