2-18
Installing and Setting up the Machine > Touch Panel
Display of Keys That Cannot Be Set
Keys of features that cannot be used due to feature combination restrictions or non-installation of options are in a non-
selectable state.
Normal Grayed out Hidden
In the following cases, the key
is grayed out and cannot be
selected.
• Cannot be used in
combination with a feature
that is already selected.
• Use prohibited by user
control.
•[
Preview
] has been
selected.
Cannot be used because an
option is not installed.
Example: When a 1,000-Sheet
Finisher is not
installed, [Staple/
Punch] does not
appear.
If a key that you wish to use is grayed out, the settings of the previous user may still be in effect. In this case, select
the [
Reset
] key and try again.
If the key is still grayed out after the [
Reset
] key is selected, it is possible that you are prohibited from using the
function by user control. Check with the administrator of the machine.
To Next Page
Loading...
