EasyManua.ls Logo

Kyocera TASKalfa 406ci

Kyocera TASKalfa 406ci
566 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8-47
Setup and Registration (System Menu) > System Menu
Optional Network
[
System Menu
] key > [
System/Network
] > [
Optional Network
]
Configure settings for the optional Network Interface Kit.
Basic
NOTE
This menu is displayed when the optional network interface kit or Wireless Network Interface Kit is installed.
Item Description
Host Name
Check the host name of the machine. Host name can be changed from Command Center RX.
Changing Device Information (page 2-53)
TCP/IP Setting
For details on setting value.
TCP/IP Setting (page 8-42)
IPSec (page 8-43)
NetWare
Use NetWare to receive documents.
See the Operation Guide for the optional network interface card for details.
Value: Off, On
AppleTalk
Selects whether to receive documents using AppleTalk.
*1
Value: Off, On
*1 The setting will be changed after restarting the device or network.
LAN Interface
Select the LAN Interface type.
*1
NOTE
Value: Auto, 10Base-Half, 10Base-Full, 100Base-Half, 100Base-Full, 1000BASE-T
This function is displayed when the optional network interface kit is installed.
MAC Address Filter
Select whether to use MAC Address Filter.
Operation Guide
for the optional network interface kit
Value: Off, On
Restart Network
Restarts the network card of the device.

Table of Contents

Other manuals for Kyocera TASKalfa 406ci

Related product manuals