Kyocera TASKalfa 406ci

5-57
Operation on the Machine > Using Document Boxes
Sending to the E-mail address of the logged in user.
When user login is enabled, documents in the custom box are sent to the E-mail address of the logged in user.
Send to the E-mail address of the logged in user. The procedure is as follows.
1
Select [Home] key.
2
Select [Send to Me(E-mail)].
Moving Documents in Custom Box
This function allows you to move documents stored in custom boxes into other boxes. The procedure for moving
documents is explained below.
1
Display the screen.
[ Home ] key > [ Custom Box ] > Select the box > [ Open ]
2
Move the documents.
1 Select the document in the list that you want to move by selecting the checkbox.
The document is marked with a checkmark.
2 [ Move/Copy ] > [ Move to Custom Box ] > [ Next ] > select the destination of move > [ Move/
Copy
] > [ OK ]
The selected document is moved.
NOTE
When this function is used, functions other than transmission cannot be used.
NOTE
If a custom box is protected by a password, enter the correct password.
NOTE
To deselect, select the checkbox again and remove the checkmark.
NOTE
If the box to which the document is to be moved is protected by a password, enter the
correct password.