8-34
Setup and Registration (System Menu) > System Menu
FAX
[
System Menu
] key > [
FAX
]
Configure settings for FAX.
FAX System 10 Operation Guide
Printer
[
System Menu
] key > [
Printer
]
Printing from computers, settings are generally made on the application software screen. However, the following
settings are available for configuring the defaults to customize the machine.
Item Description
Emulation
Select the emulation for operating this machine by commands oriented to other types of
printers.
Value: PCL6, KPDL, KPDL (Auto)
When you have selected [
KPDL (Auto)
], set "Alt Emulation", too.
When you have selected [
KPDL
] or [
KPDL (Auto)
], set "KPDL Error Report", too.
Alt Emulation
When you have selected [
KPDL (Auto)
] as emulation mode, you can switch between KPDL
and another emulation mode (alternative emulation) automatically according to the data to
print.
Value: PCL6
KPDL Error Report
When an error has occurred during printing in KPDL emulation mode, set whether or not the
error report is output.
Value: Off, On
Color Setting
You can choose whether reports are printed in color or black and white.
Value: Color, Black & White
Gloss Mode
Gloss Mode increases the effect of glossiness in printing. However, printing takes longer time.
Value:
Off, On
Gloss Mode is not available when [Labels] or [Transparency] is selected as the paper
type setting.
Cassette/MP Tray Settings (page 8-7)
Depending on the paper used, printing in gloss mode may cause curl in paper. To reduce curl,
try using thicker paper.
EcoPrint
EcoPrint conserves toner when printing. This is recommended for test copies where faded
printing is not a problem.
Value: Off, On
Toner Save Level (EcoPrint)
Select the default Toner Save Level (EcoPrint).
Value: 1 (Low) to 5 (High)
Raising the level reduces toner consumption, but image quality falls.
To Next Page
Loading...
