9-32
User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration
ID Card Settings
If ID card authentication is enabled, select the authentication type.
1
Display the screen.
1
[
System Menu
] key > [
User Login/Job Accounting
]
2
"User Login Setting" [
Next
] > "ID Card Settings" [
Next
]
2
Configure the settings.
The following settings can be selected.
This functions appears when the Card Authentication kit is activated.
Optional Applications (page 11-8)
This function does not appear when the user logs in as a network authentication user.
If the login user name entry screen appears during operations, enter a login user name
and password, and select [
Login
]. For this, you need to login with administrator
privileges.
The factory default login user name and login password are set as shown below.
Item Descriptions
Keyboard Login
When ID card authentication is enabled, select whether or not login by
keyboard is allowed.
Value: Permit, Prohibit
Additional
Authentication
*1
*1 This function does not appear when the server type is set to [
NTLM
] or [
Kerberos
] in "Network
Authentication".
Select whether or not to require password entry after authenticating by ID
card.
Value: Off, Use Password, Use PIN Code
To Next Page
Loading...
