5-42
Operation on the Machine > Handling Destination
Checking and Editing Destinations
Check and edit a selected destination.
1
Display the screen.
Specify the destination.
2
Check and edit the destination.
Select a destination and select [
Detail/Edit
] to check it. The entered addresses can be edited
if they have been specified.
Select a destination and select [
Delete
] to remove the destination from the list.
.
Specifying Destination (page 5-39)
• When selecting [
On
] for Entry Check for New Destination, the confirmation screen
appears. Enter the same host name and path again, and select [
OK
].
Entry Check for New Dest. (page 8-28)
• When selecting [
On
] for Destination Check before Send, the confirmation screen appears
after pressing the [
Start
] key.
Dest. Check before Send (page 8-28)
Confirmation Screen of Destinations (page 5-43)
To Next Page
Loading...
