6-20
Using Various Functions > Functions
Staple/Punch
Staples the finished documents. The staple position can be selected.
Staple
Staples the finished documents. The staple position can be selected.
Original Orientation and Staple Position
1,000-Sheet Finisher, 3,000-Sheet Finisher
Item Value Description
Staple
Off
Top Left Select the staple position. For details on original orientation
and staple position, refer to the following:
Original Orientation and Punch Hole Position (page 6-22)
Top Right
2 staples Left
2 staples Top
2 staples Right
Original
Orientation
Top Edge on Top, Top Edge on Left, Auto
*1
*1 This function can only be used when the optional OCR Scan Activation Kit is installed.
Select the orientation of the original document top edge to
scan correct direction. Select [
Original Orientation
] to choose
orientation of the originals, either [
Top Edge on Top
] or [
Top
Edge on Left
]. Then select [
OK
].
This function requires the optional Sheet Finisher:
Inner Finisher (page 11-26)
1,000-Sheet Finisher (page 11-27)
3,000-Sheet Finisher (page 11-28)
Image Original Orientation
Original Print results
Top Edge on
Top
Top Edge on
Left
To Next Page
Loading...
