8-50
Setup and Registration (System Menu) > System Menu
Data Security
[
System Menu
] key > [
System/Network
] > [
Data Security
]
Configure settings for data stored in the SSD, hard disk, and machine's memory.
Item Description
SSD Initialization
Initialize data saved on an SSD.
Data Security Kit (E) Operation Guide
This function is displayed when the SSD is installed and the optional Data Security Kit is
activated.
Hard Disk Initialization
Initialize data saved on a hard disk.
Data Security Kit (E) Operation Guide
This function is displayed when the Hard Disk is installed and the optional Data Security Kit is
activated.
Hard Disk/SSD Initialization
Initialize data saved on a hard disk/SSD.
Data Security Kit (E) Operation Guide
This function is displayed when the Hard Disk and SSD are installed, and the optional Data
Security Kit is activated.
Data Sanitization
Return the following information registered in the machine to the factory defaults.
• Address Book
• Favorites
• System settings
• Fax transmission and reception / forwarding data
• Transmission histories
• Data saved in Custom Box
• Optional applications
Once in progress, the processing cannot canceled.
Before executing this function, disconnect modular, network, and other cables.
Do not turn off the power switch while sanitizing the data. If the power is turned off during data
erasing, erasing will be executed automatically when the power is restored, however, complete
erasure cannot be guaranteed.
Software Verification
Verify the installed software.
Select [
Start
] to start verification.
If an error occurs during software verification, contact your dealer or service representative.
To Next Page
Loading...
