8-42
Setup and Registration (System Menu) > System Menu
System/Network
Configures machine system settings.
Network
[
System Menu
] key > [
System/Network
] > [
Network
]
Configures network settings.
Host Name
TCP/IP Setting
Item Description
Host Name
Check the host name of the machine. Host name can be changed from Command Center RX.
Changing Device Information (page 2-53)
Item Description
TCP/IP
Select whether to use TCP/IP Protocol.
Value: Off, On
IPv4
Set up TCP/IP (IPv4) to connect to the network. This setting is available when [
TCP/IP
] is set to
[
On
].
IP Address
Set the IP address.
Value: ###.###.###.###
When DHCP is set to [
On
], this function will be grayed out and the value cannot be entered.
Subnet Mask
Set the IP subnet mask.
Value: ###.###.###.###
When DHCP is set to [
On
], this function will be grayed out and the value cannot be entered.
Default Gateway
Set the IP gateway address.
Value: ###.###.###.###
When DHCP is set to [
On
], this function will be grayed out and the value cannot be entered.
DHCP
Select whether to use the DHCP (IPv4) server.
Value: Off, On
Auto-IP
Select whether to use Auto-IP.
Value: Off, On
• When setting the Auto-IP, enter "0.0.0.0" in [IP Address].
• After changing the setting, restart the network or turn the machine OFF and then ON.
To Next Page
Loading...
