8-43
Setup and Registration (System Menu) > System Menu
Item Description
IPv6
Set up TCP/IP (IPv6) to connect to the network. This setting is available when [
TCP/IP
] is [
On
].
IPv6
Select whether to use IPv6.
Value: Off, On
Selecting [
On
] displays IP address in [
IP Address (Link Local)
] after restarting the network.
RA (Stateless)
Select whether to use RA (Stateless).
Value: Off, On
This function is displayed when [
IPv6
] is set to [
On
].
Selecting [
On
] displays IP address in [
IP Address (Stateless)
] after restarting the network.
Manual Setting
Manually specify the IP address, prefix length, and gateway address of TCP/IP (IPv6).
Value
IP Address (Manual):128-bits address is expressed in eight groups consisting of four-
digit hexadecimal digits. The groups are separated by colon (:).
Prefix Length: 0 to 128
Default Gateway: 128-bits address is expressed in eight groups consisting of four-
digit hexadecimal digits. The groups are separated by colon (:).
This function is displayed when [
IPv6
] is set to [
On
].
To enter "Default Gateway", set [
RA (Stateless)
] to [
Off
].
DHCP
Select whether to use the DHCP (IPv6) server.
Value: Off, On
This function is displayed when [
IPv6
] is set to [
On
].
Selecting [
On
] displays IP address in [
IP Address (Stateful)
] after restarting the network.
Bonjour
Select whether to use Bonjour.
Value: Off, On
IPSec
Select whether to use IPSec.
Value: Off, On
After changing the setting, restart the network or turn the machine OFF and then ON.
To Next Page
Loading...
