6-45
Using Various Functions > Functions
Memo Page
Delivers copies with a space for adding notes.
You can also print two originals onto the same sheet with a space or add lines to indicate page boundaries.
Select [
Layout A
] or [
Layout B
] and select the page layout from "Layout".
Layout A
Reduces images of each original page for printing onto half of a page,
leaving the other half blank for notes.
Layout B
Reduces images of two original pages for printing onto half of a page,
leaving the other half blank for notes.
The paper sizes supported in Memo mode are A4, B5, A5, Legal, Oficio II, 216 × 340 mm, Letter, Statement, Folio and
16K.
Item Value Description
Off
Layout A Layout
Left/Top, Right/Bottom Select how to lay out the pages of scanned original.
Border Line
None, Solid Line, Dotted Line,
Positioning Mark
Select the boundary line type. Select [
Border Line
] to
select the page boundary line, and select [
OK
].
Original
Orientation
Top Edge on Top,
Top Edge on Left, Auto
*1
*1 This function can only be used when the optional OCR Scan Activation Kit is installed.
Select the orientation of the original document top edge
to scan correct direction. Select [
Original Orientation
]
to choose orientation of the originals, either [
Top Edge
on Top
] or [
Top Edge on Left
]. Then select [
OK
].
Layout B Layout
Top L to R, Top R to L,
Top L to B, Top R to B
Select how to lay out the pages of scanned original.
Border Line
None, Solid Line, Dotted Line,
Positioning Mark
Select the boundary line type. Select [
Border Line
] to
select the page boundary line, and select [
OK
].
Original
Orientation
Top Edge on Top,
Top Edge on Left, Auto
*1
Select the orientation of the original document top edge
to scan correct direction. Select [
Original Orientation
]
to choose orientation of the originals, either [
Top Edge
on Top
] or [
Top Edge on Left
]. Then select [
OK
].
To Next Page
Loading...
