6-52
Using Various Functions > Functions
Continuous Scan
Scans a large number of originals in separate batches and then produce as one job.
Originals will be scanned continuously until you select [
Finish Scan
].
Select [
On
] to use continuous scanning. To use Job Build, select [
Job Build
]. You can set the functions that appear on
the screen during scanning.
(
Value
: [
Off
] / [
On
] / [
Job Build
])
Job Build
When [
Job Build
] is selected when copying or printing, the binding orientation for finished documents can be selected
from [
Binding Left
], [
Binding Right
] or [
Binding Top
].
The following functions can be selected during scanning.
Negative Image
Inverts black and white portions of the image for printing.
(
Value
: [
Off
] / [
On
])
Mirror Image
Copies the mirrored image of the original.
(
Value
: [
Off
] / [
On
])
Item Description
Next Copy: On Back
In duplex copying, prints on the back side if the next page is to be printed on the front side.
Select [
Next Copy: On Back
] to use this function.
Next Copy: On Front
In duplex copying, prints on the front side if the next page is to be printed on the back side.
Select [
Next Copy: On Front
] to use this function.
Sheet Insertion
Inserts a blank paper in the next page. Select [
Sheet Insertion
] to use this function.
To Next Page
Loading...
