5-32
Operation on the Machine > WSD Scan
Executing WSD scan
1
[Home] key > [Send]
2
Place the originals.
3
Display the screen.
Select [
WSD Scan/DSM Scan
].
If DSM Scan is set to [
Off
] in the network settings, select [
WSD Scan
] and go to step 4.
4
Scan the originals.
Procedure using this machine
1
[
From Operation Panel
] > [
Next
]
2
Select the destination computer > [
OK
]
Select [
Reload
] to reload the computer list.
You can view information on the selected computer by selecting [
Detail
].
3
Set the type of original, file format, etc., as desired.
4
Press the [
Start
] key.
Sending begins and the software installed on the computer is activated.
Procedure from Your Computer
1
[
From Computer
] > [
Next
]
2
Use the software installed on the computer to send the images.
Loading Originals (page 5-2)
DSM Scan (page 8-44)
To Next Page
Loading...
