6-47
Using Various Functions > Functions
Image Repeat
Tiles the 1 copied sheet with an original image. You can also specify the area of the original to repeat.
* The input units can be changed in System Menu.
Measurement (page 8-13)
Item Value Description
Off
Zoom Priority
25 to 400% (in 1% increments) Set the default screen.
Select [
+
] or [
-
] to change the displayed
magnification as desired. Select
[
# Keys
] to use the numeric keys for
entry.
Specify
Repeat
Area
Off
On:
Start
Metric
X1: 0 to 355 mm
Y1: 0 to 215 mm
Inch
X1: 0.00 to 14.01"
Y1: 0.00 to 8.49"
To set the area of the original to be
repeated, select [
On
] for "Specify
Repeat Area".
Select [
+
] or [
-
] to input the area of the
original to be repeated.*
Select [
# Keys
] to use the numeric keys
for entry.
Y1: Length from top left of platen to top
edge of repeat area
X1: Length from top left of platen to left
edge of repeat area
Y2: Height of repeat area
X2: Width of repeat area
On:
Area
Metric
X2: 1 to 356 mm
Y2: 1 to 216 mm
Inch
X2: 0.01 to 14.02"
Y2: 0.01 to 8.50"
Double Copy
―
Makes 2 copies of the same original on
a single sheet.
For example, you can double-copy an
A5 original onto an A4 sheet which you
then cut in half to make 2 copies that are
identical to the original.
To Next Page
Loading...
