8-49
Setup and Registration (System Menu) > System Menu
Network Interface (Send)
[
System Menu
] key > [
System/Network
] > [
Network Interface (Send)
]
Security Level
[
System Menu
] key > [
System/Network
] > [
Security Level
]
Interface Block Setting
[
System Menu
] key > [
System/Network
] > [
Interface Block Setting
]
This allows you to protect this machine by blocking the interface with external devices such as USB hosts or optional
interfaces.
This function is displayed when the optional network interface kit or Wireless Network Interface Kit is installed.
Item Description
Network Interface (Send)
Specify the network interface card to be used for the send function, the network authentication
and connecting to external address book.
Value: Standard, Optional NIC
Item Description
Security Level
Specify the security level.
Value
Low: This mode is used during maintenance. Do not use normally.
High: This is the security setting we recommend. Use this setting normally.
Very High: In addition to [High] setting, this setting disables the machine settings to be
changed from external command.
Item Description
USB Host
This locks and protects the USB port (USB host).
Value: Unblock, Block
USB Device
This locks and protects the USB interface connector (USB Device).
Value: Unblock, Block
USB Storage
This locks and protects the USB memory slot.
Value: Unblock, Block
This function is available when USB Host is set to [
Unblock
].
Optional Interface 1
This locks and protects the optional interface slots.
Value: Unblock, Block
To Next Page
Loading...
