8-24
Setup and Registration (System Menu) > System Menu
Manual Staple
[
System Menu
] key > [
Common Settings
] > [
Manual Staple
]
Offset Documents by Job
[
System Menu
] key > [
Common Settings
] > [
Offset Documents by Job
]
Offset One Page Documents
[
System Menu
] key > [
Common Settings
] > [
Offset One Page Documents
]
Low Toner Alert Level
[
System Menu
] key > [
Common Settings
] > [
Low Toner Alert Level
]
Only displayed when the optional 3,000-Sheet Finisher is installed.
Item Description
Manual Staple
Select whether to use Manual Staple.
Value: Off, On
If you selected [
On
], set the time until manual stapling mode is automatically cancelled. The
setting range is 5 to 60 seconds (in 5-second increments).
Staple Position
Set the default Staple Position.
Value: A4 Long Edge, Letter Long Edge
Item Description
Offset Documents by Job
Select whether to offset documents by Job.
Value: Off, On
This function is displayed when an optional Sheet Finisher is installed.
Item Description
Offset One Page Documents
Set whether one-page documents are sorted.
Value: Off, On
This function is displayed when an optional Sheet Finisher is installed.
Item Description
Low Toner Alert
Set the amount of remaining toner to notify the administrator when to order a toner when the
toner is running low.
This notification is used for event report, Status Monitor, SNMP Trap.
Value: Off, On
If [
On
] is selected, set the amount of remaining toner to alert. The setting range is 5 to 100% (in
1% increments).
To Next Page
Loading...
