This cannot be set when Text Stamp is set in the system settings.
Printing Jobs (page 8-21)
Item Value Description
Off
On Stamp
Date, User Name, Serial Number,
Numbering, Text 1, Text 2
Set the stamp to be printed.
When [
Text 1
] or [
Text 2
] is selected, select
[
Change
] below and enter the text string.
If you selected [
Date
], select [
Date Format
] and
select [
MM/DD/YYYY
], [
DD/MM/YYYY
], or
[
YYYY/MM/DD
] to set the date format.
To set [
Numbering
], select [
Numbering Default
] and
set the starting sequence number (1 to 9999999).
Position
Top Left, Top Middle, Top Right,
Middle Left, Center, Middle Right,
Bottom Left, Bottom Middle,
Bottom Right, Detail
Set the stamp position to be printed.
Select [
Position
] and select the text stamp position.
Select [
Detail
] to specify the detailed stamp
position using numeric values, and to set the stamp
position when a stamp is placed on the back side
of the paper in duplex printing.
Font Size
Registered font sizes are
displayed. For details on
registering font sizes, refer to the
following:
Font (Bates Stamp) (page 8-20)
Set the font size of bates stamp.
Style
None, Bold, Italic, Bold/Italic Set the font style of bates stamp.
Font
Courier, Letter Gothic Set the font of bates stamp.
Color
Black, Red, Green, Blue, Cyan,
Magenta, Yellow, White
Set the color of the bates stamp.
Density
10 to 100%
(in 10% increments)
Set the density of bates stamp color.
Set the value by selecting [
+
] or [
-
].
Display
Pattern
Transparent, Clipping, Overwrite Set the display method of the bates stamp.
Original Orientation
Top Edge on Top,
Top Edge on Left, Auto
*1
*1 This function can only be used when the optional OCR Scan Activation Kit is installed.
Select the orientation of the original document top
edge to scan correct direction. Select [
Original
Orientation
] to choose orientation of the originals,
either [
Top Edge on Top
] or [
Top Edge on Left
].
Then select [
OK
].
To Next Page
Loading...
