6-56
Using Various Functions > Functions
DP Read Action
When the document processor is used, select the scanning operation for the document processor.
Skip Blank Page
When there are blank pages in a scanned document, this function skips the blank pages and prints only pages that are
not blank.
When set to [
High
], the level at which blank paper is recognized is higher.
The machine detects blank pages, saving unnecessary printing without the need to check for blank pages in the
document.
Select [
Low
], [
Middle
] or [
High
] in [
On
].
Quiet Mode
Lower print and scan speed for quiet processing.
Select this mode when the running noise is uncomfortable.
It is possible to set the use of Quiet Mode for each function, such as copying and sending.
(
Value
: [
Off
] / [
On
])
Item Description
Speed Priority
Gives priority to scanning speed.
Quality Priority
Gives priority to image quality at a slightly slower scan speed.
• The processing speed will be slower than normal when in Quiet Mode.
• This cannot be used when [
Prohibit
] is set for "Specify for Each Job".
Specify for Each Job (page 8-57)
To Next Page
Loading...
