Kyocera TASKalfa 406ci - Configuring Job Accounting; Default Setting

9-46
User Authentication and Accounting (User Login, Job Accounting) > Configuring Job Accounting
Configuring Job Accounting
Default Setting
Select the default value for usage limit, and whether or not to enable counting by paper size.
1
Display the screen.
1 [ System Menu ] key > [ User Login/Job Accounting ]
2 "Job Accounting Settings" [ Next ] > "Job Accounting (Local)" [ Next ] >
"Default Setting" [
Next ] > "Default Counter Limit" [ Next ]
NOTE
If the login user name entry screen appears during operations, enter a login user name
and password, and select [
Login ]. For this, you need to login with administrator
privileges.
The factory default login user name and login password are set as shown below.
Model Name Login User Name Login Password
TASKalfa 356ci 3500 3500
TASKalfa 406ci 4000 4000