8-44
Setup and Registration (System Menu) > System Menu
Protocol Settings
Item Description
SMTP (E-mail TX)
Select whether to send E-mail using SMTP.
Value: Off, On
POP3 (E-mail RX)
Select whether to receive E-mail using POP3.
Value: Off, On
FTP Client (Transmission)
Select whether to send documents using FTP. To use the FTP Client, set the protocol to [
On
].
The default port number is 21.
Value: Off, On
FTP Server (Reception)
Select whether to receive documents using FTP.
*1
Value: Off, On
SMB Client (Transmission):
Select whether to send documents using SMB. To use the SMB Client, set the protocol to [
On
].
The default port number is 445.
Value: Off, On
NetBEUI
Selects whether to receive documents using NetBEUI.
*1
Value: Off, On
WSD Scan
Select whether to use WSD Scan.
*1
Value: Off, On
WSD Print
Set whether to use our proprietary web services. WIA driver, TWAIN driver and Network FAX
driver use this Enhanced WSD web service.
*1
Value: Off, On
i-FAX
Select whether to use i-FAX.
Value: Off, On
This function is displayed when the optional Internet FAX Kit is activated.
DSM Scan
Select whether to use DSM scan.
*1
Value: Off, On
ThinPrint
Select whether to use ThinPrint. To use the Thin Print protocol, set the protocol to [
On
]. The
default port number is 4000.
*1, *2
Value: Off, On
This function is displayed only when the optional ThinPrint Option is activated.
Thin Print over SSL
To use the Thin Print over SSL protocol, set [
Thin Print Over SSL
] and [
SSL
] to [
On
].
Value: Off, On
When selecting [
On
], it also requires a certificate for SSL. The default certificate is the self-
certificate of the machine.
Command Center RX User Guide
LPD
Selects whether to receive documents using LPD.
*1
Value: Off, On
Raw
Select whether to receive documents using Raw Port.
*1
Value: Off, On
IPP
Selects whether to receive documents using IPP. To use the IPP protocol, set [
IPP
] to [
On
], and
set [
SSL
] to [
Off
]. In addition, select [
Not Secure (IPP&IPPS)
] on IPP Security under Security
Settings from the Command Center RX. The default port number is 631.
*1
Value: Off, On
To Next Page
Loading...
