6-21
Using Various Functions > Functions
Inner Finisher
Mixed Size Stapling
Even with mixed paper sizes, if the sizes have the same width as shown in the combinations below, the output can be
stapled. The size of sheets that can be stapled together is Letter and Legal. Up to 30 sheets can be stapled.
Punch
Punches holes in sets of finished documents.
Image Original Orientation
Original Print results
Top Edge on
Top
Top Edge on
Left
Two position staple is not available for long edge paper orientation.
Two position staple is not available for B5 paper.
When performing Mixed Size Stapling, refer to the following:
Mixed Size Originals (page 6-16)
• The optional 1,000-Sheet Finisher and punching unit or the optional 3,000-Sheet Finisher are required.
• For details on paper sizes that can be punched, refer to the following:
1,000-Sheet Finisher (page 11-27)
3,000-Sheet Finisher (page 11-28)
Punch Unit (For 1,000-Sheet Finisher) (page 11-27)
• The inch model provides two-hole and three-hole punching. The metric model provides two-hole and four-hole
punching.
To Next Page
Loading...
