6-22
Using Various Functions > Functions
Original Orientation and Punch Hole Position
Item Value Description
Punch Off
2 holes Left Select the position of punch holes. For details on original
orientation and position of punch holes, refer to the following:
Original Orientation and Punch Hole Position (page 6-22)
2 holes Top
2 holes Right
3 holes Left
3 holes Top
3 holes Right
4 holes Left
4 holes Top
4 holes Right
Original
Orientation
Top Edge on Top, Top Edge on Left, Auto
*1
*1 This function can only be used when the optional OCR Scan Activation Kit is installed.
Select the orientation of the original document top edge to
scan correct direction. Select [
Original Orientation
] to choose
orientation of the originals, either [
Top Edge on Top
] or [
Top
Edge on Left
]. Then select [
OK
].
Image Original orientation
Original Print results Glass platen Document processor
To Next Page
Loading...
