7 COMMAND CENTER ADMINISTRATOR MODE
122 Setting up From COMMAND CENTER
4) Tree
Enter the NDS tree.
5) Search root
Enter the NetWare server name that this equipment preferentially searches for the queues.
Setting up HTTP Network Service
In HTTP Network Service, you can enable or disable Web-based services such as COMMAND CENTER and e-Filing web
utility.
1) Enable HTTP Server
Select whether the Web-based services such as COMMAND CENTER and e-Filing web utility are enabled or disabled.
2) Enable SSL
Select whether the SSL (Secure Sockets Layer) is enabled or disabled.
When this is enabled, the data transferred between the equipment and client computers will be encrypted using a
private key when operating COMMAND CENTER and e-Filing web utility.
To enable SSL, you must create a self-signed certificate or import a server certificate in Security Service. If the
self-signed certificate is not created or a server certificate is not imported, the SSL will not work correctly. For
Windows Vista, you need to import certificates also to the client PC.
P.135 “Setting up Security Service”
P.316 “Installing Certificates for a Client PC”
Not all operating systems support SSL for all protocols.
3) Primary Port Number
Enter the port number for the NIC HTTP server. Generally “80” is used for this port.
4) Secondary Port Number
Enter the port number for COMMAND CENTER and the e-Filing web utility. Generally “8080” is used for this port.
5) SSL Port Number
Enter the port number for the SSL. Generally “10443” is used for this port.
To Next Page
Loading...
