7 COMMAND CENTER ADMINISTRATOR MODE
180 Setting up From COMMAND CENTER
Deleting an LPR queue
1
Select a radio button of a queue that you want to delete and click [Delete].
The confirmation dialog box appears.
2
Click [OK].
The selected queue is deleted.
Setting up Print Service settings
In the [Print Service] submenu in the [Setup] menu, an administrator can configure such print services as Raw TCP Print,
LPD Print, IPP Print, FTP Print, NetWare Print, and Email Print.
Setting the Print Service settings
1
Access COMMAND CENTER in the administrator mode.
P.100 “Accessing COMMAND CENTER Administrator Mode”
2
Click the [Setup] menu and [Print Service] submenu.
The Print Service submenu page is displayed.
To Next Page
Loading...
