7 COMMAND CENTER ADMINISTRATOR MODE
200 Maintenance From COMMAND CENTER
Restoring data from backup file
An administrator can restore the address book, mailboxes, and templates data using the backup files. This maintenance
feature is used to restore data from backup files after updating the system software or hard disk replacement, etc., to
recover the original environments. Also you can upload the data in different equipment using this Function.
When restoring the data from the backup file, the same template number settings and mailbox settings are overwritten.
Restoring data from backup files
Before restoring the data from backup files, confirm that there is no print job, no scan job, and no fax job. The backup
files cannot be restored if there are any jobs that have been processed. If restoring the data takes a long time, restore
the data after the equipment turns into the Sleep/Auto Shut Off mode.
1
Access COMMAND CENTER in the administrator mode.
P.100 “Accessing COMMAND CENTER Administrator Mode”
2
Click the [Maintenance] menu and [Restore] submenu.
The Restore submenu page is displayed.
3
Click [Browse] in the data section that you want to restore, or click [Browse] in the
[Combined Restore] section to restore all data from a backup file of all data.
You cannot restore several backup files at a time.
The Choose file dialog box appears.
To Next Page
Loading...
