Kyocera TASKalfa 650c

7 COMMAND CENTER ADMINISTRATOR MODE
192 Setting up From COMMAND CENTER
 Setting up Destination Profile
Select an output profile to be used for color space conversion when you print color data.
1) Default Profile
Select a destination profile to be displayed as a default setting of the color profile setting of a printer driver. You can
select among destination profiles already registered in this equipment.
2) [Maintenance]
Click this to perform maintenance of destination profiles. The Maintenance Destination Profile page is displayed as you
click this. You can import profiles into this equipment, or export or delete the registered profiles. For the details, see the
following:
 P.187 “Importing profiles”
 P.188 “Exporting profiles”
 P.190 “Deleting profiles”
3) Rendering Intent
Select how you perform color space conversion when you print images.
- Perceptual — This is recommended for photo images.
- Relative Colorimetric
— More original colors can be retained than those when you select [Perceptual].
- Saturation — This is recommended when the vividness of colors are more important than their correct
reproduction. It is useful for graphic charts.
- Absolute Colorimetric — Original colors can be retained even on colored paper.
1
2
3